Power supplies by application
Engineers rarely start from a product category. They start from what has to be powered: a control cabinet, a luminaire, a battery bank, a rack of equipment. These pages group the catalogue that way — each one describes what the application demands of a power supply, what decides the choice, and which product categories usually serve it.
Open an application to see its categories, then filter by voltage, power and mounting to shortlist models. If your application is not listed, tell us what the supply has to power and we will specify it.
Industry and buildings
- Industrial AutomationControl cabinets, PLC racks, sensor networks and machine controls. Most of this equipment runs from a 24 V DC rail, f...
- Motor DrivesMachines where a motor is driven at variable speed: pumps, fans, conveyors and small process equipment. Two separate ...
- Building & Home AutomationLighting control, blinds, HVAC actuators and room controllers in commercial and residential buildings, generally wire...
- Security & SurveillanceCCTV cameras, access control, intruder alarms and door hardware, typically fed from a central cabinet over long cable...
Lighting and energy
- LED LightingLuminaires, linear strip, high-bay fittings, architectural and outdoor lighting. The driver determines the light outp...
- Battery Charging & Energy StorageCharging lead-acid and lithium batteries in standby power, mobility, industrial vehicles and stored-energy systems, i...
- Renewable Energy & Off-grid PowerOff-grid and hybrid installations: solar generation, battery storage, and the conversion equipment that turns a DC bu...
Infrastructure and equipment design
- Telecom & DatacomRack-mounted equipment in exchanges, cabinets, head-ends and equipment rooms, conventionally powered from a −48 V DC ...
- Test & MeasurementProduction test rigs, burn-in racks, laboratory benches and automated test equipment, where the supply is part of the...
- Embedded & Board-level DesignPower conversion built into a product rather than supplied alongside it: open-frame AC/DC boards fitted inside an equ...
Application not listed?
Tell us what the supply has to power and where it will run, and we will specify it with headroom for inrush and derating for your ambient temperature.
- 1 Describe the load, the environment and any certification the end product needs.
- 2 We come back with specific part numbers, pricing and lead time.
Request a quote
Send us a part list or describe your requirement.