MEAN WELL VFD-250P-230 250W VFD

Part numberVFD-250P-230
Motor rated power250 W
$42.71Excluding tax and shipping
Ships in 3–5 business daysLead time is the time from order to dispatch, and does not include transit time.
Request bulk quote
VFD-250P-230 model selection table VFD Series
  • Genuine product Sourced through our documented supply chain.
  • Worldwide shipping Export documentation handled for you.
  • Commercial invoice Available for every order.
  • Specification support Talk to someone who reads datasheets.

Key specifications

Complete technical specifications
Output
Motor rated power 250 W
Motor output 0–268V UVW, 380V max line-to-line
Mechanical
Operating temperature -30 to 70 °C
Power factor correction Supported
Dimensions (L × W × H) 127 × 76.2 × 35 mm

Is this model right for you?

Choose this drive only if your motor's rated current stays within 1 A and its voltage needs fall inside the 0–268 V UVW range (380 V maximum line-to-line). Confirm that brief overload demands stay within the 2 A for 5 s peak rating, and check that the 127 × 76.2 × 35 mm chassis fits your enclosure with room for heat dissipation. Note that the 380 VDC bus is internal to the drive, not a user-accessible supply rail, so do not plan any external load around it.

Product overview

The VFD-250P-230 is an AC/AC VFD from MEAN WELL's VFD Series. Its dimensions are 127 × 76.2 × 35 mm and its net weight is 260 g. The operating temperature range is -30 to 70 °C, and the humidity range is 20 to 90%.

Where this model fits

The VFD-250P-230 is used in Motor Drives. Its operating temperature range is -30 to 70 °C and its humidity range is 20 to 90%. The unit measures 127 × 76.2 × 35 mm and has a net weight of 260 g.

Complete technical specifications

Rev. 2024-11-22
Output
Motor output 0–268V UVW, 380V max line-to-line
Motor current 1 A
Motor peak current 2A for 5s
Output profile variable frequency drive
Primary DC output Not applicableMotor output is adjustable AC. The DC bus is internal.
Motor rated power 250 W
DC bus 380±5VDC internal bus
Input
Power factor 0.99
Power factor correction Supported
Environmental
Operating temperature -30 to 70 °C
Storage temperature -40 to 85 °C
Operating humidity 20–90 % RH
Vibration 10 ~ 500Hz, 2G 10min./1cycle, period for 60min. each along X, Y, Z axes
Mechanical
Dimensions (L × W × H) 127 × 76.2 × 35 mm
Net weight 260.0 g
Safety & compliance
Safety standards CB IEC61800-5-1,TUV/BS EN/EN61800-5-1,EAC TP TC004 approved

These approvals are recorded for the series as a whole. Where a line names particular models or ratings, it applies only to those — read it against this part number, and ask us for the certificate if your approval process needs it.

Identification
Part number VFD-250P-230
Brand MEAN WELL
Category AC/AC VFD
Series VFD-250P-230

Approvals and compliance

From the manufacturer's datasheet for this series

Europe

  • TÜV

    A TÜV certificate is third-party testing against the European EN standard. It is the evidence behind a CE declaration rather than a replacement for it: CE remains the manufacturer's own declaration, and the TÜV report is what makes that declaration defensible.

International

  • CB Scheme

    A CB Test Certificate reports testing against the IEC standard and is accepted by member certification bodies as the basis for a national approval. It shortens a new-country approval rather than granting market access by itself, so it is the most useful item on this list when you are entering a market that is not shown here.

Eurasian Economic Union

  • EAC

    Conformity with the Eurasian Economic Union technical regulations, covering Russia, Belarus, Kazakhstan, Armenia and Kyrgyzstan. TP TC 004 is the low-voltage regulation and TP TC 020 the electromagnetic-compatibility one, so which number appears tells you what was assessed.

Isolation and electromagnetic compatibility
Withstand voltage I/P-FG:2KVAC
Isolation resistance I/P-FG:100M Ohms/500VDC/25℃/ 70%RH
EMC emission Parameter Standard Test Level / Note

Standards certified against

  • EN61800-5-1
  • IEC61800-5-1
Read the datasheet's exact wording

CB IEC61800-5-1,TUV/BS EN/EN61800-5-1,EAC TP TC004 approved

Reproduced unedited from the manufacturer's datasheet. Where an approval covers only some models, the wording says so. Ask us for the certificate itself if your approval process needs it.

Certificates

Certificate copy supplied with this model.

  • CE · R50453592

    100%
    CE certificate R50453592

    CE · Certificate number R50453592

Ordering & shipping information

Order and delivery terms
Part number VFD-250P-230
Minimum order quantity 1
Country of origin China
Typical packed weight 428 g
Unit weight 260 g

Downloads

VFD-250P-230 model comparison

View all models
ModelOutput voltageRated currentRated powerPriceAvailability
VFD-250P-230 250 W$42.71
Ships in 3–5 business days

Request a bulk quote

Tell us the quantity and target date and we will come back with pricing, lead time and stock position for this part number.

  1. 1 We confirm the part number and quantity against current stock.
  2. 2 You receive pricing, lead time and freight options by email.
  3. 3 Approve the quotation and we issue the invoice and shipping documents.

Request a quote for VFD-250P-230

Confirm quantity and destination and we will come back with pricing and lead time.

Quoting VFD-250P-230 View
Have a BOM? Reply to our confirmation email with the file attached.
We use your details only to answer this request.

Technical data source

Primary source
MEAN WELL
Datasheet revision
2024-11-22
Last verified

View the manufacturer datasheet How we source and verify product data

Specifications are transcribed from the manufacturer datasheet and are subject to change without notice. The current manufacturer datasheet governs in case of any discrepancy.