MEAN WELL ENP-360-12 358.8W 13.8V 26A Charger

Part numberENP-360-12
Output voltage 13.8 V
Rated current 26 A
Rated power 358.8 W
$105.37Excluding tax and shipping
Ships in 3–5 business daysLead time is the time from order to dispatch, and does not include transit time.
Request bulk quote
ENP-360 model selection table ENC/ENP Series
  • Genuine product Sourced through our documented supply chain.
  • Worldwide shipping Export documentation handled for you.
  • Commercial invoice Available for every order.
  • Specification support Talk to someone who reads datasheets.

Key specifications

Complete technical specifications
Output
Output voltage 13.8 V
Rated current 26 A
Rated power 358.8 W
AC input range 90–264 VAC
Typical efficiency 91 %
Mechanical
Operating temperature -30 to 70 °C
Power factor correction Supported
Dimensions (L × W × H) 192 × 178 × 45.5 mm

Is this model right for you?

Within the ENP-360 series, the ENP-360-12 lists a 13.8 V output voltage and 26 A output current. The ENP-360-24 lists 27.6 V and 13 A, while the ENP-360-48 lists 55.2 V and 6.5 A. Output adjustment ranges also differ: 11.5 to 15 V for ENP-360-12, 23.5 to 30 V for ENP-360-24, and 47.5 to 58.8 V for ENP-360-48.

Product overview

The ENP-360-12 is an AC/DC charger in the ENP-360 series. It lists a 13.8 V output voltage and 26 A output current, with an output adjustment range of 11.5 to 15 V. Input voltage range is 90 to 264 VAC or 127 to 370 VDC, and input frequency range is 47 to 63 Hz. Typical efficiency is 91%, and ripple and noise is 150 mVp-p. Dimensions are 192 × 178 × 45.5 mm and net weight is 1500 g.

Where this model fits

The ENP-360-12 is used in Battery Charging & Energy Storage and Renewable Energy & Off-grid Power. Its 13.8 V output voltage and 26 A output current are the model-specific electrical figures for this charger.

Complete technical specifications

Rev. 2026-03-31
Output
Output voltage 13.8 V
Rated current 26 A
Rated power 358.8 W
Voltage adjustment range 11.5–15 V
Ripple & noise 150 mVp-p
Input
AC input range 90–264 VAC
DC input range 127–370 VDC
Frequency range 47–63 Hz
Typical efficiency 91 %
No-load consumption 0.5 W
Power factor 0.98
Power factor correction Supported
Protection
Overload Protected
Over voltage Protected
Over temperature Protected
Shut down o/p voltage, re-power on to recover
Environmental
Operating temperature -30 to 70 °C
Storage temperature -40 to 85 °C
Operating humidity 20–95 % RH
Vibration 10 ~ 500Hz, 2G 10min./1cycle, 60min. each along X, Y, Z axes
Mechanical
Dimensions (L × W × H) 192 × 178 × 45.5 mm
Net weight 1500.0 g
Safety & compliance
Safety standards IEC62368-1, UL62368-1, EAC TP TC 004, J62368-1 (Only for 12V,24V) approved; Meet BS EN/EN62368-1 (datasheet note applies)

These approvals are recorded for the series as a whole. Where a line names particular models or ratings, it applies only to those — read it against this part number, and ask us for the certificate if your approval process needs it.

Identification
Part number ENP-360-12
Brand MEAN WELL
Category AC/DC Charger
Series ENP-360

Approvals and compliance

From the manufacturer's datasheet for this series

United States

  • UL

    UL Listing or Recognition means UL Solutions tested samples against the applicable UL safety standard and audits the factory that builds them. A UL file number is the usual evidence an inspector or specifier asks for in North America.

Eurasian Economic Union

  • EAC

    Conformity with the Eurasian Economic Union technical regulations, covering Russia, Belarus, Kazakhstan, Armenia and Kyrgyzstan. TP TC 004 is the low-voltage regulation and TP TC 020 the electromagnetic-compatibility one, so which number appears tells you what was assessed.

Japan

  • PSE

    Conformity with Japan's Electrical Appliance and Material Safety Act. Japanese datasheets cite a J-prefixed standard such as J62368-1, which is the Japanese deviation-adjusted version of the IEC text.

    Covers only part of this series: Only for 12V,24V

An approval above is held by only some models in this series. The datasheet's own wording is quoted beside the mark; read it against this part number, and ask us for the certificate if your approval process needs it.

Isolation and electromagnetic compatibility
Withstand voltage I/P-O/P:3KVAC I/P-FG:2KVAC O/P-FG:0.5KVAC
EMC emission Parameter Standard Test Level / Note

Standards certified against

  • EN62368-1
  • IEC62368-1
  • J62368-1
  • UL62368-1
Read the datasheet's exact wording

IEC62368-1, UL62368-1, EAC TP TC 004, J62368-1 (Only for 12V,24V) approved; Meet BS EN/EN62368-1 (datasheet note applies)

Reproduced unedited from the manufacturer's datasheet. Where an approval covers only some models, the wording says so. Ask us for the certificate itself if your approval process needs it.

Certificates

Certificate copy supplied with this model.

  • CE · R50453592

    100%
    CE certificate R50453592

    CE · Certificate number R50453592

Ordering & shipping information

Order and delivery terms
Part number ENP-360-12
Minimum order quantity 1
Country of origin China
Typical packed weight 1778 g
Unit weight 1500 g

Downloads

ENP-360 model comparison

View all models
ModelOutput voltageRated currentRated powerPriceAvailability
ENP-360-12 13.8 V26 A358.8 W$105.37
Ships in 3–5 business days
ENP-360-2427.6 V13 A358.8 W$105.37
Ships in 3–5 business days

ENP-360-12 lists 13.8 V output voltage and 26 A output current; ENP-360-24 lists 27.6 V and 13 A.

ENP-360-12 lists 13.8 V output voltage and 26 A output current; ENP-360-48 lists 55.2 V and 6.5 A.

ENP-360-12 lists an output adjustment range of 11.5 to 15 V; ENP-360-24 lists 23.5 to 30 V; ENP-360-48 lists 47.5 to 58.8 V.

Request a bulk quote

Tell us the quantity and target date and we will come back with pricing, lead time and stock position for this part number.

  1. 1 We confirm the part number and quantity against current stock.
  2. 2 You receive pricing, lead time and freight options by email.
  3. 3 Approve the quotation and we issue the invoice and shipping documents.

Request a quote for ENP-360-12

Confirm quantity and destination and we will come back with pricing and lead time.

Quoting ENP-360-12 View
Have a BOM? Reply to our confirmation email with the file attached.
We use your details only to answer this request.

Technical data source

Primary source
MEAN WELL
Datasheet revision
2026-03-31
Last verified

View the manufacturer datasheet How we source and verify product data

Specifications are transcribed from the manufacturer datasheet and are subject to change without notice. The current manufacturer datasheet governs in case of any discrepancy.